







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Sunrise Manor Homeowners Choose PGT Construction
Barrett & Sons Construction Sunrise Manor provides independent PGT service and installation for owners of PGT impact windows, aluminum series windows and sliding glass doors throughout Sunrise Manor, NV. We’re not affiliated with or authorized by PGT – we’re an independent contractor that has spent years working on the brand’s Florida-built products, and we know how they hold up under a Mojave summer. If you own PGT windows or doors in Sunrise Manor and something’s foggy, sticking, leaking or corroded, call (844) 312-0069 for a free estimate.
Sunrise Manor isn’t a city with its own inspection department. It’s an unincorporated Clark County township that grew up fast east of Las Vegas, and the housing here swings hard in two directions: 1950s-70s block and wood-frame ranch homes near Lamb and Charleston, and 1990s-2000s stucco tract homes out toward Nellis. Both ends of that spread end up with PGT products, and both need someone who understands what the desert does to them. We pull Clark County permits when a job needs one, and we put every scope and price change in writing before work starts.
Why Trust Barrett & Sons Construction Sunrise Manor for Your PGT Construction?

Our crews know the PGT product line from the inside. We’ve replaced failed insulated glass units in PGT WinGuard Aluminum and WinGuard Vinyl impact windows, reset and rehung sliding glass door panels, and traced water intrusion at door corners back to weathered seals more times than we can count. That matters because PGT builds to Florida wind and impact standards, not desert thermal-cycling standards. The hardware and glass are good. The desert is just hard on the seals around them.
We use OEM PGT parts for critical components like impact glass and door hardware whenever they’re available, and we say so plainly when we’re recommending a quality aftermarket seal or weatherstrip instead. We’re independent, so we’re not locked into one supply chain or one answer. If your frame is sound, we’ll tell you to repair it. If three units in a row are failing, we’ll show you the math on replacement. Our technicians have up to 28 years of experience, and every eligible job includes permits pulled and inspections signed.
You get the same written standard on a PGT window job as on a full remodel: scope in writing, change orders in writing, and the 90-Day Done Right Promise on the work. A live person answers the phone, day or night.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Sunrise Manor
The failures we see on PGT products around Sunrise Manor are specific. So are the causes.
- Foggy insulated glass units (IGUs). The seal between panes fails and moisture gets in. You’ll see it as haze or condensation trapped between the glass, usually on sun-baked south and west exposures first. The window isn’t broken – the unit is. A failed IGU cuts your insulation value and blocks the view.
- Sliding glass door hardware corrosion and misalignment. PGT sliding doors take a beating from grit, heat and thousands of open-close cycles. Rollers wear, tracks pit, and the panel starts dragging or failing to seat against the lock. A door that won’t seat properly is a security issue as much as a convenience one.
- Water intrusion at door corners and seams. Degraded weatherstripping and dried sealant are the usual cause, and monsoon-season storms in July through September are when it shows. Microburst rain dumps fast enough to find every gap, and a flat-roof or hardpan-yard lot channels it straight at your door.
- Impact laminate bubbling or delamination. PGT WinGuard impact glass uses a laminated layer for impact resistance. Years of UV exposure can bubble or delaminate that laminate, dulling clarity and thinning the impact protection. Desert sun accelerates this compared to the coastal climates these windows were engineered for.
- Hardware binding on aluminum series windows. Extreme thermal movement – weeks over 105°F followed by cooler nights – works on gaskets, frames and operators. Windows that opened freely in spring start to bind by August. Usually a hardware and alignment fix, not a window replacement.
PGT Parts & Our Repair-vs-Replace Approach

Here’s how we source and how we decide.
For critical components – impact glass, door rollers, locks and operators – we go to PGT or an OEM-compatible supplier. For seals and weatherstripping, we’ll recommend a quality aftermarket product that meets or exceeds original specs when it makes more sense than waiting on a factory part. We don’t claim to stock PGT parts locally. Each part is sourced for the specific window or door in front of us.
Repair or replace is an honest call, not a sales call. If the frame is sound, replacing a failed IGU or a worn roller is the cost-effective answer. If multiple seals are failing, hardware is corroded through, or there’s structural movement in the frame, replacement is the better investment and we’ll show you why. We give you the numbers both ways and let you decide. Call (844) 312-0069 for a free second opinion on any written estimate you already have.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the specific unit, check the frame for soundness, test door operation and lock engagement, and look for the source of any water intrusion rather than just the symptom.
- 2
Repair or install. For a failed IGU we order the replacement unit and swap it without pulling the whole window. For hardware we match the OEM part. For installation we set impact windows to PGT’s spec and flash and seal the opening.
- 3
Test. We operate every door and window through a full cycle, check lock and screen engagement, and water-test the seals on any opening we touched.
- 4
Warranty and paperwork. You get the scope in writing, the parts documented, and the 90-Day Done Right Promise on the work. If something isn’t right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Sunrise Manor
We handle PGT WinGuard Aluminum Impact Windows and PGT WinGuard Vinyl Impact Windows, both the impact-rated lines built for wind-borne debris protection. We service PGT Aluminum Series non-impact windows for standard openings, and PGT Sliding Glass Doors including roller, track, lock and glass replacement. We install new impact windows and full window replacements throughout Sunrise Manor, and we handle the roof repair work that often comes with storm-related window and door leaks. Every installation is permitted through Clark County when the job requires it.
We Also Service These Brands
PGT isn’t the only brand on these streets. We work with KraftMaid cabinetry in kitchens, Kohler fixtures in baths, GAF roofing systems, and Master Halco fencing. That multi-brand range matters to a Sunrise Manor homeowner who doesn’t want to hunt down a different contractor for every product on the house.
FAQs – PGT Construction Service in Sunrise Manor

Is Barrett & Sons Construction Sunrise Manor authorized by PGT? No. We’re an independent contractor and are not affiliated with, authorized by, or a dealer of PGT. We work on PGT products because we’ve spent years installing and servicing them across Sunrise Manor, and we know their failure points.
Do you use genuine PGT/OEM parts? Yes, for critical components like impact glass and door hardware we use OEM PGT parts whenever they’re available. For seals and weatherstripping we may recommend a quality aftermarket product that meets or exceeds original specs.
How long does PGT service take? A hardware or seal repair is often a single visit. A failed IGU replacement depends on parts lead time, usually a short wait once the unit is ordered. A full impact window installation is scheduled across the days the job needs.
What PGT models/series do you cover? PGT WinGuard Aluminum Impact Windows, WinGuard Vinyl Impact Windows, PGT Aluminum Series non-impact windows, and PGT Sliding Glass Doors. Call (844) 312-0069 if you’re unsure which series you have.
Will service void my PGT warranty? Proper service with OEM parts and correct technique shouldn’t void a manufacturer warranty. We document what we do on every job so your paperwork holds up if you ever file a claim.
How much does PGT construction cost in Sunrise Manor? Impact window installation runs $8,000 – $25,000 depending on count and series. Window replacement runs $4,500 – $15,000. Roof repair tied to window or door leaks runs $400 – $1,800. Call (844) 312-0069 for an exact quote – estimates are free.
| Service | Typical Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
Here’s how a foggy WinGuard pane usually goes: a homeowner notices condensation trapped between the panes, blurring the view and cutting insulation. Inspection finds a failed perimeter seal in the insulated glass unit that let moisture in. A qualified technician orders a replacement IGU and swaps the failed unit, restoring clarity and performance without touching the rest of the window.
Can you repair a foggy PGT impact window, or does the whole window need to be replaced? In most cases we repair it by replacing just the failed insulated glass unit, not the whole window. We confirm the frame is sound first, then order the replacement unit.
My PGT sliding glass door is hard to open – is this a common issue? Yes, it’s one of the most common PGT issues we see in Sunrise Manor. Worn rollers, pitted tracks and dried weatherstripping all cause drag, and all are serviceable.
How do I know if my PGT windows are still under warranty? Check the original purchase paperwork and contact PGT directly with your model and installation date. We don’t administer PGT warranties, but we document our service so your claim paperwork stays clean.
Are PGT impact windows suitable for Sunrise Manor’s climate? They hold up well, but the desert is harder on seals and laminate than the Florida coast these were engineered for. UV exposure and thermal cycling are the enemies, so routine seal checks matter here.
What’s the difference between PGT WinGuard and their standard windows? WinGuard is PGT’s impact-rated line with laminated glass built to resist wind-borne debris. The Aluminum Series non-impact windows are standard glazing without that laminate layer. Call (844) 312-0069 and we’ll identify what you have.
Book Your PGT Service in Sunrise Manor, NV
Whether it’s a foggy WinGuard pane, a sticky sliding door, or a full impact window install, Barrett & Sons Construction Sunrise Manor gives you a written scope, permits pulled when needed, and the 90-Day Done Right Promise. Call (844) 312-0069 for a free estimate on your PGT work in Sunrise Manor.
Written by the team at Barrett & Sons Construction.












